Choose your language : 中文 | 日本语
New Purchase of FUJI NXT3 Boost SMT Capacity to 4 Times
The purchase of FUJI new generation of NXT III arrived at EDADOC SMT factory on December 21. These machines boost SMT capacity to 4 times.
Source ：Edadoc 2014/12/25>>Detail
Merry Chirstmas & Happy New Year
Thank you for your business support to EDADOC this year. Wish you and your family a Merry Christmas and a happy and prosperous New Year!
Source ：Edadoc 2014/12/23>>Detail
EDADOC’s Successful High-speed PCB Design Seminar in Silicon Valley
On September 24, 2014, EDADOC USA hosted the “High Speed PCB Design” seminar in CROWNE PLAZA, San Jose. EDADOC R&D Director Bruce Wu gave the all-English professional speeches at the seminar.
Source ：Edadoc 2014/9/26>>Detail
R&D Director Spoke on High-speed PCB Design in PCBWEST Conference
On September 11, EDADOC’s R&D director Bruce
Wu gave a speech on High-speed PCB Design in PCB WEST 2014 CONFERENCE.
Source ：Edadoc 2014/9/19>>Detail
Professional, Attractive---Edadoc at PCBWEST2014 Exhibition
September 10th, 2014, EDADOC USA, Inc. attended the annual PCBWEST2014 Exhibition in Santa Clara.
Source ：Edadoc 2014/9/17>>Detail
Forecast: EDADOC’s Technical Seminar in San Jose in Sept. 24
EDADOC is going to hold a technical seminar on High Speed PCB Design in San Jose in September 24. You are warmly welcome to attend this seminar if you are interested in high speed PCB design.
Source ：EDADOC 2014/9/3>>Detail
Edadoc Will Attend PCB West 2014
September 10, 2014, EDADOC USA will attend PCB WEST 2014 exhibition in Santa Clara. You are very welcomed to visit our booth at 511 .
Source ：Edadoc 2014/9/3>>Detail
EDADOC Held Seminar Successfully in Beijing, Shanghai, Shenzhen
In the past 9 months this year, EDADOC has successfully held the Technical Seminar in Beijing, Shanghai, Shenzhen, Xi’an, Chengdu, Guangzhou, Xiamen, Wuhan. Over 1,000 engineers who specialized in electronic communication, digital consumer, medical device, industrial controller areas attend the seminars.
Source ： 2014/9/3>>Detail
EDADOC Will Meet You at DesignCon 2014
On Jan.28~ 31, 2014 Edadoc will participate in the DesignCon exhibition
in Santa Clara Convention Center. We invite you to visit our booth in
739. We would be glad to meet you!
Source ： 2014/9/4>>Detail
6 SMT Lines Start Operations
EDADOC’ wholly owned SMT&PCBA factory has increased 4 SMT lines at the beginning of this year. From now on, EDADOC’s 6 SMT lines are all put into operations. Our SMT capability for SMT prototype, small and medium volume was significantly improved.
Source ： 2014/9/3>>Detail